Automatic Installation - Konica Minolta DiMAGE Z6 Instruction Manual

When the USB connection is completed, a drive icon, or volume, appears in My Computer or the
desktop; the name varies with memory card. When using Windows XP, a window opens requesting
instructions on what to do with the image data; follow the directions in the window.
Windows XP
102 Data-transfer mode
Windows
Mac OS
Connecting to Windows 98 and 98 SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system's add-new-hardware wizard; see the instructions on
the following page. During installation, if the operating system requests the Windows 98 CD-ROM,
insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special
driver software is required for other Windows or Macintosh operating systems.

Automatic Installation

Before connecting the camera to the computer,
place the Digital Camera Software CD-ROM in
the CD-ROM drive. The DiMAGE installer menu
should automatically activate. To automatically
install the Windows 98 USB driver, click on the
Install-the-Windows-98 USB-Mass-Storage-
Driver button. A window appears to confirm that
the driver should be installed; click "Yes" to
continue.
When the driver has been successfully installed,
a window appears. Click "OK." Restart the
computer and connect the camera (p. 101) to
complete the operation.
103