Language; File Number (#) Memory; Folder Name; Date And Time Setup - Konica Minolta DiMAGE Z6 Instruction Manual

Language

The language used in the menus can be changed in section 1 of the setup menu. See page 19 for
details.

File number (#) memory

If file number memory is selected, when a new folder is created or
a new memory card is used, the next image recorded will have a
file number one greater than the last file saved. If the new card
contains an image with a greater file number, the new image will
be assigned a file number one greater than the greatest on the
card. If the file number memory is disabled, the image file number
is reset to 0001 when saved in a new folder or card. File number
memory is activated in section 2 of the setup menu.

Folder name

All recorded images are stored in folders on the memory card. Two folder-name for-
mats are available in section 2 of the setup menu, standard and date.
Standard folders have an eight character name. The initial folder is named
100KM029. The first three digits are the folder's serial number, which will increase
by one each time a new folder is created. The next two letters refer to Konica
Minolta, and the last three numbers indicate the camera used; 029 indicates a
DiMAGE Z6.
A date folder name also starts with the three digit serial number and is followed by
one register for the year, two register for the month, and two registers for the day:
101YMMDD. The folder 10151219 was created in 2005 on December 19th.
92 Setup menu
File # memory Off
Folder name Std. form
Date/Time set –
Date imprint Off
100KM029
(Standard)
10151219
(Date)
With the date folder format selected, when an image is recorded, a new folder with the day's date is
created. All images recorded that day are placed in that folder. Images recorded on a different day
are placed in a new folder with the corresponding date. If the file number memory function is off (p.
92), when a new folder is created, the serial number in the image-file name is reset to 0001. If file
number memory function is on, the serial number in the image-file is one greater than the last image
saved. For more information on folder organization and file names, see page 106.

Date and time setup

It is important to accurately set the clock. When a still image or a movie clip is recorded, the date
and time of the recording are saved with the image and are displayed during playback or can be
read with the supplied DiMAGE Master Lite software. The date format that is displayed or imprinted
can be changed: YYYY/MM/DD (year, month, day), MM/DD/YYYY (month, day, year), DD/MM/YYYY
(day, month, year). The date/time setup screen is opened from section 2 of the setup menu (p. 88).
Date/Time set
2005 . 1. 1
0 : 0
MM / DD / YYYY
:move :sel. :enter
Date/Time setup screen
Use the left and right keys to select the item to be
changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and calen-
dar.
93