Setting The Date And Time; Setting The Menu Language - Konica Minolta DiMAGE Z6 Instruction Manual

Setting the date and time

After initially inserting a memory card and batteries, the
camera's clock and calendar must be set. When images are
recorded, the image data is saved with the date and time of
recording.
If the clock and calendar have not been set, a message is
1
displayed for a few seconds each time the camera is turned
on. This message is also displayed if the clock and calen-
dar reset when the camera is stored without batteries for a
long period.
Set date and time?
Yes No
Date/Time set
2005 . 1. 1
0 : 0
MM / DD / YYYY
:move :sel. :enter
Date/Time setup screen
The date/time setup screen can be opened in section 2 of the
setup menu.
18 Getting up and running
Use the left and right keys of the controller (1) to
select "Yes." "No" cancels the operation.
Press the center of the controller to open the
date/time setup screen.
Use the left and right keys to select the item to be
changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and calen-
dar.

Setting the Menu language

For customers in certain areas, the menu language may have
to be set. Press the menu button (1) to open the menu; the
appearance of the menu will depend on the position of the
camera's controls.
2
Navigating the menu is simple. The up/down and left/right keys
of the controller (2) move the cursor and change settings on
the menu. The central button of the controller selects menu
1
options and sets adjustments.
Drive m
Image
Drive mode Single
Quality
Image size 2816x2112
Auto D
Quality Standard
Digital
On
Auto DSP
Anti-shake Disp + Exp.
LCDbrightness –
Power save 1 min.
Inst.Playback Off
Language English
Lens acc. None
LCDbrightness
Power save
Inst.playback Japanese
•English
Language
Lens acc. Deutsch
Use the right key of the controller to highlight "setup"
at the top of the menu.
Press the central button of the controller to open the
setup menu.
Use the down key to highlight the language menu
option.
Press the right key to highlight the current language.
Use the up/down keys of the controller to select the
language.
Press the central button to complete the operation.
19