Lighting Instructions - Valor 700IN Owner's Manual

OWNER'S
INFORMATION
FOR YOUR SAFETY, READ BEFORE LIGHTING
WARNING
: If you do not follow these instructions exactly
A. This appliance has a pilot which must be lighted by hand or by remote control. Follow these instructions exactly. To
save gas, turn the pilot off when not using the appliance for a prolonged period of time.
WHAT TO DO IF YOU SMELL GAS
C. Use only your hand to push in or turn the control knobs. Never use tools. If the knobs will not push in or turn by hand,
D. Do not use this appliance if any part has been under water
the appliance and to replace any part of the control system and any gas control, which has been under water.
1. STOP! Read the safety information above. Dependent on model, switch #1 may be mounted directly to valve see Fig 2A.
2. SET ON/OFF SWITCH (1) TO "OFF" POSITION.
W
"B" in the safety information above on this label. If you don't smell gas, go to the next step.
3. AUTOMA
( );
On the remote control handset, press and hold the 'off ' button and
When the pilot is lit, the Flame Adjustment knob (3) will automatically rotate to the highest setting.
Press the (small flame)
4. MANUAL
Set Flame Adjustment knob (3) to the lowest setting ( );
If the pilot will not stay lit after several tries, turn the gas control knob (3) to "OFF" ( ) and call your local
service technician or gas supplier.
manually or use the up/down 'flame' buttons on the remote control handset to adjust the
1. AUTOMATIC SHUT
Press and hold the
2. MANUAL SHUT-OFF (using only the ON/OFF switch (1))
Press "O" the ON/OFF switch (1) to shut-off the appliance.
16

Lighting Instructions

r.
r's phone. Follow the gas supplier's instructions.
r
LIGHTING INSTRUCTIONS
W
TO TURN OFF GAS TO APPLIANCE
(small flame)
ce technician to inspect
r. If you smell gas, STOP! Follow
Adjustment knob (3) to lowest setting
(large flame)
Adjustment knob (3) up ( ) or down
1
Alternate
position