Operation - Home Decorators Charles Mill Use And Care Manual

Operation

Operation
NOTE:
The control panel can be accessed at the upper-right corner of the insert. When a function is changed
from the control panel or remote control there will be a corresponding indicator (see Figure 1) on the upper-right
of the projection screen. The indicator shows the function changed and the level selected by the control panel or
remote control. When the function is turned off, the corresponding indicator will flash several times and then fade
off.
1
Powering the Fireplace
Push the Power button to supply power to all
functions of the fireplace and put the insert in a
standby mode.
Push the Power button again to turn off all functions.
NOTE:
All previous settings are held in memory, so the
next time you power up the fireplace, the unit will turn on
with the same settings.
NOTE:
Holding the Power button on the control panel for
10 seconds will disable the heater function.
3
Adjusting the Heater
Press the Heater button to set the thermostat. Your
fireplace consists of a fan-forced wire-element-type
heater. The thermostat setting range is 62°F - 82°F or
17°C - 27°C or always ON.
This button on the remote control only turns ON and
OFF the heater function.
NOTE:
To change between °F and °C press and hold the
Heater button on the control panel for 3 seconds.
5
Adjusting the Spectrafire Speed
The flame speed is only adjustable from the remote control.
Each Spectrafire flame color option has speed options
available.
Setting 1 is slowest ranging up to setting 5 which is the
fastest.
2
Adjusting the Spectrafire Color
There are 5 unique Spectrafire flame effects that can be
selected.
1: Spectrafire
2: Sapphire
3: Amethyst
4: Campfire
5: Midnight Fire
AU: Auto Cycle which will automatically fade in and fade out
a new color flame effect periodically.
4
Adjusting the Spectrafire Intensity
The intensity is only adjustable from the remote control.
Each Spectrafire flame color option has 5 intensity options
available.
6
Setting the Timer
Press the Timer button to cycle through the 10 timer
settings (30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H,
7H, 8H and 9H) and the OFF setting.
15
Please contact 1-800-986-3460 for further assistance.
Fig . 1
HOMEDEPOT.COM/HOMEDECORATORS