Conventional Objects (Conv) - Radio Shack PRO-651 User Manual

Conventional Objects (CONV)

A Conventional Channel Object (CONV) is a single
conventional frequency.
To create a new CONV object:
1. Press PGM.
2. Press the NEW softkey.
3. Press the CONV softkey.
4. Configure settings for the object. To restore the
default setting, press the Dflt softkey.
5. To scan the object, you must assign the object
to at least one scan list.
6. Press the Save softkey.
CONV Menu
Scan Lists – Press SEL to assign the object to
scan lists. An asterisk (*) indicates an assigned
scan list.
Freq – Enter frequency in MHz.
Tag – The display name for the object.
Sq Mode – Subaudible squelch mode or Project 25
conventional digital modulation.
Search Automatically analyzes signals to determine
squelch mode and code
None Ignore subaudible squelch
CTCSS Tone coded squelch. Squelch Code required.
Digitally coded squelch. Squelch Code required.
DCS
Project 25. Squelch Code required.
P25
Squelch Code – Use Search to detect tone or code
value for selected squelch type.
Scroll
Change
Setting
56
CONV Menu (Cont.)
L/Out – Permanent lockout status for the object.
Priority – On or off.
LED Mode – Solid or Flash.
LED Color – 0=Off, 1=Red, 2=Yellow, 3=Green,
4=Cyan, 5=Blue, 6=Magenta, 7=White.
Latch LED – Off, the Alert LED is on only during a
transmission; On, the Alert LED remains lit after a
transmission, unless overridden.
Backlight – On, Off, or Flash.
Alarm – None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp,
Fast Hi-Lo, DTMF#.
Fav – Assigns the object to the Favorites scan list.
Skywarn – Assigns the object to the Skywarn
Scan List.
Modulation – Automatic, AM, FM, or NFM
Atten – Attenuator, applies 20 dB of attenuation
to reduce interference from strong signals.
Delay – On or off.
Delay Time – (1-250) Delay time in 100 ms.
Digital AGC – On or off.
Supertrack – Alternative DSP decoding algorithm.
May help reception on some systems.
AudioBoost – 6 dB audio level boost.
Hit Count – Number of received transmissions for
the object. Global Hit Counts must be set to on.
Press the Dflt softkey to reset to 0.
57