Priority Scan; Favorites Scan List - Radio Shack PRO-651 User Manual

Priority Scan

You can designate increased priority to certain
objects:
Priority Off
G
Scanning
1 . 3 . . . 7 . . .
. . . . . . . . . .
Priority On
G
Scanning
1 . 3 . . . 7 . . .
. . . . . . . . . .
• CONV – The scanner samples objects for activity
more frequently.
• TGRP – The scanner checks the priority object
first and during reply delays of non-priority
objects.
To set priority for objects:
• While scanning, when the scanner stops for a
transmission, press PRI.
Note: plD will change to PlD indicating priority
is set.
• In Manual or Program modes, browse to the
object and then press PRI.
Note: plD will change to PlD indicating priority
is set.
• You can edit an object's Priority setting directly
during programming.
pri
PRI
30
To activate Priority Scan Mode:
While the radio is scanning, press FUNC and then
press PRI. Repeat to cancel Priority Scan Mode.
NOTE: Priority sampling may cause brief muting of
received audio if another object is active.

Favorites Scan List

To add an object to the Favorites Scan List, press
FUNC and then FAV while the object is active.
When you press FAV later, your scanner suspends all
scanning except for the Favorites Scan List.
To clear the entire FAV Scan List:
1. Press PGM.
2. Press the GLOB softkey.
3. Scroll to down to the Clear FAV menu item.
4. Press SEL. You will be asked to confirm the
action.
5. Press the Save softkey.
31