Scanning - Radio Shack PRO-651 User Manual

Scanning

When scanning, the radio checks programmed
scannable objects for transmissions, stopping when
transmissions are received.
You can use lock out functions to skip specific
objects, and you can make entire scan lists active or
inactive.
To scan objects:
1. Press SCAN. The two rows under Scanning
represent your scanner's scan lists (Top row =
scan lists 1-10, bottom row = scan lists 11-20).
G
Scanning
1 . 3 . . . 7 . . .
. . . . . . . . . .
2. Numbers represent active scan lists, periods
represent inactive scan lists. To toggle a list,
press the corresponding number on the keypad.
For 11-20, press FUNC and then the second
number (FUNC + 3 = 13).
When the scanner recieves a transmission, the
object infomation apears on the screen.
S
T
04-0237 CONV
FM
FIRE
3. To pause the scanner on an active object, press
PSE.
4. Press PSE or SCAN to resume scanning.
pri
Scan List
Object ID
plD
153.950000
CT:127.3
28
To enable Scan Lists from Global Settings:
1. Press PGM to enter Program Mode
2. Press the GLOB softkey.
3. Scroll to the Scan Lists parameter and press SEL.
4. Use the 4-direction keypad to toggle the scan
list. An asterisk (*) indicates that the scan list is
enabled.
5. Use
or to access the Enabled option
6. Use or to enable selected scan list.
7. Press the SAVE softkey.
8. Press SAVE again.
29