Short Paper; Insufficient Memory To Support Resource Save Feature; Insufficient Memory To Collate Job; Insufficient Memory For Flash Memory Defragment Operation - InfoPrint G510-7276-00 User Manual

32.yy Replace Unsupported <color> Cartridge
Replace the unsupported toner cartridge with a supported one.

34 Short paper

Try one or more of the following:
•
Press to clear the message and continue printing.
•
Press , and then press

35 Insufficient memory to support Resource Save feature

The printer lacks sufficient memory to save settings. Install additional memory, or press
and continue printing.

37 Insufficient memory to collate job

The printer prints the pages that were spooled prior to the collation message and collates the remainder of the print
job.
Try one or more of the following:
•
Press to clear the message and continue printing.
•
Press , and then press

37 Insufficient memory for Flash memory Defragment operation

The printer cannot defragment flash memory because the memory used to store undeleted flash resources is full.
•
To perform the defragment operation, delete fonts, macros, and other data in the memory, or install additional
printer memory, and then press
•
Press , and then press

38 Memory Full

The printer does not have enough memory available to continue printing. You cannot press
Try one or more of the following:
•
Press , and then press
•
Simplify the print job by reducing the amount of text or graphics on a page and deleting unnecessary downloaded
fonts or macros.
•
Install additional printer memory.
39 Complex page, some data may not have printed
The page is too complex to print. Press
40 <color> Invalid refill, change cartridge
Replace the toner cartridge with a new one.
to cancel printing.
to cancel printing.
to continue printing.
to cancel printing.
to cancel printing.
, and then press
Understanding printer messages
101
to cancel printing.
to disable Resource Save
because of this.