Heating Circuit Designation - Viessmann VITOLIGNO 300-P Operating Instructions Manual

Heating circuit designation

You can designate heating circuits 1 and 2 (HK1 and HK2) individually. The
abbreviations HK1 and HK2 remain.
Press the following keys:
1. "MENU".
2. |/~ for "Settings".
3. d to confirm.
4. |/~ for "Heating circuit
designation".
Settings
Contrast
Key note
Heating circuit designation
5. d to confirm.
6. |/~ for selecting "Heating
circuit 1" (HK1), "Heating
circuit 2" (HK2) or
"Common circuit".
7. d to confirm.
8. |/~ for the selected letter.
Note
You can hold down
until the selected letter
appears.
If you want to cancel the
selection, press
a blank space appears.
9. d
10. Continue until the word is written
out.
11. d
For further settings the following display
is shown for "Heating circuit 1":
Please select
Boiler
Ground floor
Heating circ. 2
| / ~
| / ~ until
Further adjustments
to confirm.
press until the line is empty
and "Accepted" appears in
the display.
Heating circuit designation
Ground floor HK1
Accepted
HK1
HK2
37