Viessmann VITOLIGNO 300-P Operating Instructions Manual page 21

Setting a permanent room temperature
16. To the beginning and end of further
time phases proceed as described
under steps 10 to 15.
Heating Mo - Su
0 2 4 6 8 10 12 14 16 18 20 22 24
2
16:30 to 23:00 h
Accepted
17. g press until the standard
display is shown (see
page 10).
Deleting time phases
Press the following keys if you want to
delete a time phase:
1. Proceed as described in points 1 to 11
of chapter "Setting switching times".
2. d press until the end of the
selected time phase is
displayed.
Heating Mo - Su
0 2 4 6 8 10
2
16:30 to 23:00 h
Change
Adjusting the room temperature
3. |/~ press until the end time
HK1
4. d
5. g
Incorporating time phases into the
on-site standard settings
If you want to incorporate all time phases
into the on-site standard settings, press
the following keys:
1. Proceed as described in points 1 to 9
2. |/~ for "Standard settings"
HK1
12 14 16 18 20 22 24
3. d
4. g
(cont.)
display "- - : - -" appears.
Heating Mo - Su
0 2 4 6 8 10 12 14 16 18 20 22 24
2
--:-- to --:-- h
Accept with OK
to confirm.
press until the standard
display is shown (see
page 10).
of chapter "Setting switching times".
Heating Mo - Su
0 2 4 6 8 10 12 14 16 18 20 22 24
Standard setting
Select with OK
twice to confirm.
press until the standard
display is shown (see
page 10).
HK1
HK1
21