D–2
SLC 5/03, 5/04 Controller Application
Hardware Connections
The scanner connects to the Channel 0 port of the SLC with an
RS-232 Synapse cable (Catalog No. 2755-HFC-SR2-01).
Power Supply
Note: The power supply
should be connected last.
Scanner Configuration
Configure the scanner using the bar codes described in Chapter 1.
The SLC controller does not require any specific scanner
configuration. However, you will need to configure the cable
communication parameters as described on the next page.
Publication 2755-6.7
RS-232 Synapse Cable
(2755-HFC-SR3-01)
To Channel 0 Port
Scanner Cable
Channel 0
Scanner
SLC 5/04