Connections - Yamaha CinemaStation DVD-S30 Owner's Manual

PREPARATION

Connections

This section explains how to connect the DVD-S30 to your TV or external AV amplifier (AVC-S30 etc.). For connections
related to external AV amplifier, refer to the manual for it.
Note
Connect the power cord of the DVD player or external components after connection of all cables are complete.
STANDBY/ON
Other video connections
(to enjoy high quality pictures)
• To make component video connection instead of video
connection using the supplied video pin cable, connect
COMPONENT (Y, P
component video input jacks of the TV using a commercially
available component video cable.
• To make SCART connection (U.K model only) instead of video
connection using the supplied video pin cable, connect SCART
jack of the DVD-S30 and SCART input jack of the TV using a
commercially available SCART cable.
y
COMPONENT jacks can output a progressive scan signal. To
enjoy high quality DVD video with progressive scan mode, set
"PROGRESSIVE" in the Setup menu to "ON" (page 23).
Downloaded From Disc-Player.com Yamaha Manuals 6
AV amplifier
(AVC-S30 etc.)
VOLUME
1 2 3 4
INPUT
MOVIE MUSIC SPORTS
GAME
MODE
OPTICAL DIGITAL
qPro Logic II
INPUT
qDigital
NIGHT DTS AAC MAIN/SUB AUTO MOVIE MUSIC DVS
1 2 3 4 5 6 7 8 9
-8 -6 -4 -2 0 +2 +4 +6 +8
SILENT CINEMA
Optical cable (supplied)
, P ) jacks of the DVD-S30 and
B R
SCART (U.K.
model only)
to AC outlet
MAINS
DIGITAL
OUT
PCM/
q DIGITAL
/MPEG
OPTICAL
Other audio connection
To make analog audio connection instead of digital
connection using the optical cable, connect AUDIO OUT
(L, R) jacks of the DVD-S30 and audio input jacks of the
AV amplifier using a commercially available audio pin
cable.
TV (monitor)
VIDEO
INPUT
Video pin cable
(supplied)
VIDEO OUT
COMPONENT
Y P
B
L
R
VIDEO P
R
AUDIO OUT