Page 4
Contents Setup Menu ......... 22 Language Codes ......33 General setup menu ......... 22 Locking/Unlocking the disc for viewing ..22 Troubleshooting ......34 Dimming the front panel display ......22 Programming disc tracks (except MP3/ Glossary ........37 WMA/JPEG/DivX) ..........22 OSD language ..........23 Specifications ......
Introduction Introduction Thank you for purchasing this unit. This This unit can play the disc types associated Playable disc formats owner’s manual explains the basic operation of this unit. This unit is designed for use with discs having This manual is printed prior to production. the logos shown below.
Introduction Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.
Functional Overview Functional Overview Front panel 7 8 9 STANDBY/ON Front panel display Turns on this unit or sets it to the standby mode. Shows the current status of this unit. Disc tray PLAY ( Loads a disc in the disc tray. Starts playback.
AV receiver (see page 9). of this unit to the remote control input jack of VIDEO OUT - S VIDEO jack your Yamaha component (see page 11). Connect to the S-video input jack of your AV HDMI jack receiver (see page 9).
Functional Overview Remote control Moves to the previous chapter or track. Searches backward.* Stops playback. Opens the disc tray.* Numeric buttons (0-9) Selects numbered items in the currently displayed menu. SUBTITLE Selects the subtitle language (see pages 18 and 20). ZOOM Enlarges the video image (see pages 16 and 19).
Connections Connections General notes on connections Notes • You need to set [DIGITAL OUTPUT] to [ALL] Be sure to turn off this unit and unplug the (see “DIGITAL OUTPUT” on page 25). power cable before you make or change • If the audio format of the digital output does not connections.
Connections Component video jacks <A> Video connections Component video connections achieve higher If your AV receiver has video output jacks, fidelity color reproduction than S-video connect your receiver and then your TV so connections by transmitting video signals on that you can use one TV for several different separate wires for luminance (Y: green) and video sources (LD, VCR, etc.) by simply chrominance (P...
Connections HDMI connection Notes • You need to set [HDMI AUDIO] (see page 25) and [HDMI VIDEO] (see page 29). HDMI jack • You need to make an appropriate audio HDMI provides high quality digital audio and connections if the connected component does not video on a single connection.
Remote control jacks Other connections This unit has remote control input/output jacks. If your AV receiver is a Yamaha product USB port and has the capability to transmit of SCENE This unit has a USB port and can access MP3,...
Getting Started Getting Started Using the remote control Step 1: Inserting batteries into Use the remote control within 6 m of this unit the remote control and point it toward the remote control sensor. Within 6 m Open the battery compartment. Notes Insert the two supplied batteries (AAA, R03, UM-4) following the indications...
Getting Started NTSC Step 3: Setting a TV type/display Select this if the connected TV is an NTSC and language system TV. It will change the video signals of PAL discs and output them in NTSC format. You can customize this unit using the setup MULTI menu displayed on the TV screen.
Getting Started Setting the audio, subtitle and disc menu languages (DVD-Video only) VIDEO SETUP PAGE You can select your own preferred language TV TYPE for the audio, subtitle and disc menu. This unit TV DISPLAY 4:3 PAN SCAN automatically switches to the selected PROGRESSIVE 4:3 LETTER BOX PICTURE SETTING...
Playback Operation Playback Operation Selecting a track/chapter Notes 2 2 / 33 or use the numeric Press • If the prohibited icon ( ) appears on the TV buttons (0-9) to select a track/chapter screen when a button is pressed, the function for that button is not available on the current disc or number.
Playback Operation MP3/WMA/DivX Playback in slow motion ➜ RPT ONE (repeat track) You can play back video in slow motion. ➜ RPT FLD (repeat folder) ➜ SHUFFLE (shuffle) Press 5 for reverse slow motion or a for ➜ RPT OFF (repeat off) forward slow motion.
Playback Operation ■ Title/Chapter/Track selection Using the on-screen display (OSD) (DVD/VCD) The OSD menu shows disc playback Press 5/a to select [TITLE] or information (e.g., the title or chapter number, [CHAPTER] (DVD) or [TRACK] (VCD). elapsed playing time or audio/subtitle language).
Playback Operation ■ Repeat/Time Display (DVD/VCD) Special VCD/SVCD features Press 5/a to select [REPEAT] or [TIME DISP.]. Using the playback control (PBC) Press ENTER. menu Press 5/a to highlight your selection, and For a VCD with a playback control (PBC) then press ENTER.
Playback Operation Playback starts automatically. If not, press Using the preview function 3 / 8 . This function displays the content of the 2 2 / 33 Press to select another track/file current folder or the entire disc. in the current folder. Press 7 during playback.
Playback Operation Playback with multi-angles Special DivX features During playback, press 2 / 3/5/a to DivX files including DMF (DivX Media rotate the picture on the TV screen. Format) features only 2: rotates the picture counter-clockwise 3: rotates the picture clockwise Using the interactive menu 5: flips the picture vertically Load a disc.
Playback Operation Playing data files Using a USB device Yamaha and suppliers accepts no liability for You can play back MP3, WMA, JPEG and the loss of data saved on the USB devices DivX files saved on your supported USB connected to this unit.
Setup Menu Setup Menu Setup is carried out on the TV screen, enabling LOCK Select this to lock playback of the current disc. you to customize this unit to suit your own Subsequent access to a locked disc requires a particular requirements.
Setup Menu ■ To start program playback Press ENTER. ➜ The input menu appears on the TV Use 2 / 3/5/a to highlight [START] on screen. the program menu, and then press ENTER. PROGRAM: TRACK (01-17) ➜ Playback starts for the selected tracks in 6 _ _ the programmed sequence.
This feature automatically sets this unit to the standby mode after a certain elapsed period. ® Yamaha provides you with a DivX (Video On Demand) registration code that In “GENERAL SETUP PAGE”, press allows you to rent and purchase videos using 5/a to highlight [SLEEP], and then ®...
Setup Menu LPCM OUTPUT Setting the analog output Select this if you have connected this unit to a Set the analog output to match the playback PCM-compatible receiver via a digital capability of this unit. terminal, such as the coaxial terminal. In this In “AUDIO SETUP PAGE”, press 5/a to case, you may need to adjust [LPCM highlight [ANALOG OUTPUT], and then...
Setup Menu Setting the lip synchronization Notes This feature allows you to delay the sound • If you are not using the HDMI audio output, set output in order to synchronize it with the this to [OFF]. video image. This may be necessary when you •...
Setup Menu When the aspect ratio of your TV is 16:9 Setting the TV display (widescreen): Set the aspect ratio of this unit to match your TV. The format you select must be available Playback Setting TV display disc on the disc. Otherwise, the TV display setting will not affect the picture during playback.
CONTACT OUR CUSTOMER SERVICE CENTER. This unit is compatible with the complete line of BRIGHTNESS Yamaha products, including the projectors Increase or decrease the value to brighten or DPX-1300, DPX-830 and the plasma monitor dim the picture. Zero (0) is the average PDM-4220.
Setup Menu Setting the HDMI video Notes When you connect this unit to an HDMI • For settings other than [AUTO], HDMI video compatible component via the HDMI jack, signals may not be output properly if a resolution select the following video output settings output setting is not supported by the HDMI depending on the connected component.
Setup Menu In “PREFERENCE PAGE”, press 5/a to Preference setup menu highlight [PARENTAL], and then press 3. Press 7 twice to stop playback (if necessary), and then press SET UP. PREFERENCE PAGE Press 2 / 3 to select “PREFERENCE AUDIO 1 KID SAFE PAGE”.
Setup Menu In “PREFERENCE PAGE”, press 5/a to ORIGINAL LIST Select this to play the originally recorded titles highlight [DIVX SUBTITLE], and then on the disc. press 3. PLAY LIST GROUP1: Select this to play the edited version of the Albanian (sq), Basque (eu), Catalan (ca), disc.
Setup Menu Press ENTER to enter the “Password Selecting the PBC (playback control) Change Page”. function You can set playback control (PBC) to on or off. This function is available only on Video CD 2.0 with the playback control (PBC) feature.
Language Codes Language Codes These codes can be used to select other languages. This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. Abkhazian 6566 Gaelic 7168 Macedonian 7775 Sardinian 8367 Afar 6565 Gallegan 7176 Malagasy 7771 Scottish Gaelic 7168 Afrikaans 6570...
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.
Page 37
Troubleshooting Problem Solution No sound or distorted sound Adjust the volume. Check that the speakers are connected correctly. For MP3/WMA, check that the sampling rate and bit rate are compatible with this unit (see “Specifications” on page 39). No audio at digital output Check the digital connections.
Page 38
Troubleshooting Problem Solution “NO DISC” appears in the front Check that the disc is placed in the disc tray correctly. panel display “UN DISC” appears in the front The disc being loaded is not supported by this unit. Check the disc type panel display (see “Playable disc formats”...
Glossary Glossary ■ Analog ■ DivX Ultra Sound that has not been converted into numerical DivX Ultra Certified products provide enhanced values. Analog sound varies, while digital sound has playback of advanced media features supported by the specific numerical values. These jacks send audio DivX Media Format.
Glossary ■ Interactive menu ■ Region code Interactive video menus offer unprecedented A system for allowing discs to be played back only in convenience and control so you can quickly navigate the region designated beforehand. This unit will only between various scenes or bonus features, and select play discs that have compatible region codes.
Specifications Specifications PLAYABLE DISC FORMATS TV STANDARD • DVD-Video • Number of lines ......PAL: 625, NTSC: 525 • DVD-R, DVD-RW, DVD-R DL • Vertical frequency....PAL: 50 Hz, NTSC: 60 Hz • DVD+R, DVD+RW, DVD+R DL • Playback........ Multistandard (PAL/NTSC) •...
Page 42
本机或造成人体伤害。Yamaha 将不对由于在本 机上使用非规定电压而造成的任何损害负责。 13 请勿尝试修改或修理本机。 当需要任何维修时 AVOID DIRECT EXPOSURE TO THE BEAM DANGER: INVISIBLE LASER RADIATION WHEN OPEN 请联系专业 Yamaha 维修人员。 不能以任何理由 DO NOT STARE INTO BEAM CAUTION: 打开机壳。 INVISIBLE LASER RADIATION WHEN OPEN 14 当准备长时间 (例如休假)不使用本机时,请 将 AC 电源线从墙上插座断开。...
将您的 USB 装置连接到本机前面板上的 的遥控输出插孔,您只要在接收机上简单 USB 端口。 地按下一个按钮,本机就会自动开始播 放。 REMOTE CONTROL 本机 HDMI 本机 USB 装置 REMOTE OUT AV 接收机 注 • 本机也许不能识别某些 USB 装置。 • 有关 USB 的详情 , 请参阅第 21 页上的“使用 注 USB 装置” 。 关于 SCENE 功能的详情,请参考您的 Yamaha AV 接收机附带的说明书。...