Page 1
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Hungary YAMAHA MUSIC AUSTRALIA PTY, LTD.
Page 2
CAUTION Use of controls or adjustments or performance of Important notes for users in the procedures other than herein may result in hazardous U.K. radiation exposure or other unsafe operation. Mains plug VAROITUS This apparatus is fitted with an approved 13 Muiden kuin tässä...
Page 3
CAUTION The unit is not disconnected from the AC power source as long as it is connected to the wall outlet,even if this unit Use of controls or adjustments or performance itself is turned off.This state is called the standby mode.In of procedures other than those specified herein this state,this unit is designed to consume a very small may result in hazardous radiation exposure.
Page 4
YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.
Contents Special VCD & SVCD Features......13 Introduction Playback Control (PBC)..........13 Region Codes..............2 Preview Function ...............13 Supplied accessories ..........2 Playing MP3/DivX/MPEG-4/JPEG/Kodak Picture Notes about discs ............2 CD ................14 Cleaning discs..............2 General Operation ............14 Selecting a folder and track/file........14 Functional Overview Special picture disc features........
Introduction Thank you for purchasing this unit. This characteristics and condition of the discs; Owner’s Manual explains the basic materials, scratches, curvature, and etc, operation of this unit. may result in failure. – Be sure to use only CD-R and CD-RW discs made by reliable manufacturers.
Functional Overview Front and Rear Panels STANDBY/ON 9 STOP – turns on this unit or sets it to the – stops playback standby mode ; PAUSE Disc tray – pauses playback / OPEN/CLOSE B PLAY – opens or closes the disc tray –...
Functional Overview Remote Control TOP MENU/RETURN – display the top-level disc menu – turn this unit ON or go to (DVD) / go back to previous standby-on mode menu (VCD) 0-9 numeric buttons MENU – select numbered items in a –...
Preparation Notes: General Notes on connections – If the audio format of the digital output Never make or change connections with does not match the capabilities of your the power switched on. receiver, the receiver will produce a strong, distorted sound or no sound at all. Make •...
Preparation S-Video terminal <A> Video Connections S (separate) video connection achieves a If your AV receiver has video output jacks, clearer picture than composite video connect your receiver (and then to your connection by separating color and TV) so that you can use one TV for several luminance when transmitting signals.
Getting Started Step1: Inserting batteries into Step2: Turning on the power the Remote Control Connect the AC power cord to the power outlet. Turn on the TV and your AV receiver. Select the appropriate input source at the AV receiver that was used to connect to this unit.
Getting Started Press 34 to highlight one of the options Step3: Setting language below: preference PAL – Select this if the connected TV is You can select your own preferred PAL system. It will change the video signal of a NTSC disc and output in PAL format. language settings.This DVD Player will automatically switch to the language for NTSC –...
Getting Started Setting the Audio, Subtitle and Disc menu language - - PREFERENCE PAGE - - AUDIO ENGLISH SUBTITLE CHINESE DISC MENU FRENCH PARENTAL SPANISH PORTUGUESE MP3/JPEG NAV POLISH PASSWORD ITALIAN DEFAULT Press STOP 9 twice then, press ON SCREEN. Press 2 repeatedly to select {PREFERENCE PAGE}.
Disc Operations IMPORTANT! General Operation – If the inhibit icon (ø or X) appears Unless otherwise stated, all operations on the TV screen when a button is described are based on Remote Control pressed, it means the function is use. not available on the current disc or at the current time.
Disc Operations Selecting various repeat/shuffle Operations for video playback functions (DVD/VCD/SVCD) Repeat and Shuffle Using the Disc Menu • While playing a disc, press REPEAT Depending on the disc, a menu may appear continuously to choose a ‘Play Mode’. on the TV screen once you load in the disc. To select a playback feature or item ➔...
Disc Operations On-Screen Display (OSD) Special DVD Features OSD menu shows the disc playback Playing a Title information (for example, title or chapter number, elapsed playing time, audio/ Press MENU. subtitle language), a number of operations ➜ The disc title menu appears on the TV can be done without interrupting disc screen.
Disc Operations Disc Interval Special VCD & SVCD Features This function is used to divide a disc into six parts by regular intervals and display Playback Control (PBC) them on one page to preview the whole disc. For VCD with Playback Control (PBC) feature (version 2.0 only) Track Interval •...
Disc Operations During playback, you can; Playing MP3/DivX/MPEG-4/ • Press S / T to select another JPEG/Kodak Picture CD track/file in the current folder. • To select another folder from the General Operation current disc, press 1 to return to the root menu, then press 34 to make your Load a disc.
Disc Operations Zoom picture Special picture disc features During playback, press ZOOM repeatedly IMPORTANT! to display the picture with different scales. You have to turn on your TV and set to Use 1 234 to view the zoomed picture. the correct Video In channel. (See page 6 “Video Connections”).
Setup Menu This DVD Player setup is carried out via Dimming player’s display panel the TV, enabling you to customise the You can select different levels of DVD Player to suit your particular brightness for the display screen. requirements. In ‘GENERAL SETUP PAGE’, press 34 to highlight {DISPLAY DIM}, then press 2.
Setup Menu Repeat steps to input another track/ Sleep Timer chapter number. This feature automatically sets the DVD If you want to remove a track player in standby mode after the amount of Use 1 234 to move the cursor to the time you have set.
Setup Menu LT/RT LPCM Output If you connect the DVD Player to a PCM Select this if your DVD player is connected compatible receiver via the digital to a Dolby Prologic decoder. terminals, such as coaxial or optical etc, VIRTUAL SURROUND you may need to adjust ‘LPCM Output’.
Setup Menu Night Mode Setting the TV Display In this mode, the high volume outputs are Set the aspect ratio of the DVD Player softened and low volume outputs are according to the TV you have connected. brought upward to an audible level. It is The format you select must be available on useful for watching your favourite action the disc.
To enable Progressive Scan function. This unit is compatible with the complete line of Press 34 to select a setting, then press YAMAHA products, including the projectors DPX- ENTER/OK to confirm your selection. 1000, LPX-510 and the plasma monitor PDM- 4210E.
Setup Menu If you select {PERSONAL}, then proceed Switching the YUV/RGB to steps This setting allows you to toggle the ➜ The ‘PERSONAL PICTURE SETUP’ output of the video signal between RGB menu appears. (on scart) and Y Pb Pr (YUV). PERSONAL PICTURE SETUP In ‘VIDEO SETUP PAGE’, press 34 to BRIGHTNESS...
Setup Menu In ‘PREFERENCE PAGE’, press 34 to Preference Setup Menu highlight {PARENTAL}, then press 2. Press 9 twice to stop playback (if any), then press ON SCREEN. Press 1 2 to select the ‘Preference Setup’ - - PREFERENCE PAGE - - icon.
Setup Menu Press ENTER/OK to enter the ‘Password MP3/JPEG Menu Change Page’. MP3/JPEG Navigator can be set only if the disc is recorded with menu. It allows you to select different display menus for easy OLD PASSWORD navigation. NEW PASSWORD In ‘PREFERENCE PAGE’, press 34 to CONFIRM PWD highlight {MP3/JPEG NAV}, then press 2.
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. Problem Solution No power –...
Page 29
Troubleshooting Problem Solution Player does not respond to – Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. some operating commands during playback. DVD Player cannot read CDs/ – Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair.
Glossary Analog: Sound that has not been turned into numbers. Multichannel: DVD is specified to have each sound Analog sound varies, while digital sound has specific track constitute one sound field. Multichannel refers to numerical values. These jacks send audio through two a structure of sound tracks having three or more chan- channels, the left and right.