Rear - bon FM-073SCH User Manual

Rear

1) DC Power Jack
7V ~ 24V DC power can be used.
2) SDI 1, 2 Input Ports
HD SDI or SD SDI input ports. SDI signal should be fulfill SMPTE standards.
3) SDI Loop-Through and HDMI-to-SDI Out Port
This port can be used either SDI Loop-through or SDI out of HDMI-to-SDI
converter.
4) Component YPbPr or CVBS 1,2,3 Input Ports
Component YPbPr or CVBS(Composite) input ports.
5) Tally Input
To display Red, Green, Amber tally.
6) Update Port (RJ-11 Jack)
Serial communication port for updating firmware or monitor control.
7) Control Port
Monitor control port. The detail is in the chapter "Remote Terminal Assignment
Connection"
8