OSD Menu
Menu opens up by pressing Menu button. This button also works as Exit button on
the Menu. The brightness knob works as up/down arrow. To select something,
press either enter button or the knob.
* The menu may disappear on no signal or instable signal input.
* Menu setting is saved for each input mode. So the user should make
selection on an appropriate input mode.
VIDEO
Brightness
Adjust brightness. Default: 127.
Contrast
Adjust contrast. Default: 127.
Chroma (Hue)
Adjust chroma. Default: 127.
Phase
Adjust phase. Default: 127.
Sharpness
Adjust sharpness. Default: 18.
SDI 3G Mode
Set this mode if the input is 3G HD SDI. SDI 3G mode support SMPTE standards
listed below:
▶ A_MS1_YCbCr422_10
10