5) When operating a power tool hazards. outdoors, use an extension cord 4. Power tool use and care suitable for outdoor use. Use of a cord 1) Do not force the power tool. Use Mini multi-function saw WX424 WX424.1...
SafeTy identical replacement parts. This will inSTrucTionS for all ensure that the safety of the power tool is SawS maintained. Kickback causes and related warnings: Kickback is a sudden reaction to pinched, Mini multi-function saw WX424 WX424.1...
Page 4
4. Always observe that the lower guard 5. Do not use dull or damaged blades. is covering the blade before placing Unsharpened or improperly set blades can saw down on bench or floor. An Mini multi-function saw WX424 WX424.1...
Page 5
Bright shiny reflective sheet steel or similar is not suitable for laser applications as the reflective surface may direct the laser beam back at the operator. Mini multi-function saw WX424 WX424.1...
Page 6
SymBolS To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear eye protection Wear ear protection Wear dust mask RCM approval mark Laser radiation Do not stare into beam Mini multi-function saw WX424 WX424.1...
Page 8
17. LASER AND LED ON/OFF SWITCH 18. BASE PLATE 19. NON-SCRATCH BASE COVER (See Fig. R) 20. PARALLEL GUIDE LOCKING SCREW (See Fig. N1) * Not all the accessories illustrated or described are included in standard delivery. Mini multi-function saw WX424 WX424.1...
Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Mini multi-function saw WX424 WX424.1...
Use the two hex keys to tighten the spindle EN 13236 xxxxxxxx clamping screw thoroughly. 76mm k. Place the two hex keys back in the case. NOTE: Never use a blade that is too thick to Mini multi-function saw WX424 WX424.1...
Page 11
This feature provides more efficient cutting angles for various applications and added gripping comfort with maximum control. Grasp the handle with one hand and push the handle adjustment button “IN” to release the handle for adjustment. Move the handle forward or backward Mini multi-function saw WX424 WX424.1...
Page 12
Your circular saw has a built-in work light for better visibility when cutting. To turn on the LED work light, the saw must be plugged in. Push the switch from OFF to LED. DEPTH WIDTH Mini multi-function saw WX424 WX424.1...
Page 13
(See Fig. Kg). WARNING: Never use the saw with your hands positioned as shown in Fig. L1. Mini multi-function saw WX424 WX424.1...
Page 14
Always let the blade reach full speed, then carefully guide the saw into the work piece. Do not bind the blade in the cut. Push the saw forward at a speed where the blade is not laboring. Mini multi-function saw WX424 WX424.1...
Page 15
Always let the blade reach full speed, then carefully guide the saw into the work piece. Do not bind the blade in the cut. Push the saw forward at a speed where the blade is not laboring. Mini multi-function saw WX424 WX424.1...
Page 17
(finishes) such as vinyls, plastics, fiberglass, laminate flooring and tiles that could easily be scratched or scraped with the steel base on the saw. Mini multi-function saw WX424 WX424.1...
This is normal and will not damage your power tool. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Mini multi-function saw WX424 WX424.1...