Email - Okina HDRS-04-1U User Manual

4.6.2 Network stream
Step1: enter into system configurationnetwork configurationsub stream; refer to Fig 4-32:
Step2: select fps, resolution, quality, encode and max bit rate
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit"
button to exit current interface.
Definitions and descriptions of network stream:
Parameter Meaning
FPS Range from: 1-25
Resolution Support CIF and D1
Quality The quality of the clients' image. The higher the value is, the clearer the record image.
Six options: lowest, lower, low, medium, higher and highest.
Encode VBR and CBR
Max bit rate
Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、2 Mbps
4.6.3

Email

Step1: enter into system configurationnetwork configurationemail; refer to Fig 4-31:
SMTP Server/Port: the name and port number of SMTP server.
If your SMTP server supports the secure connection (SSL), like Gmail, please set the "Port" to 465 and check
"SSL Check"
Send address/password: sender's email address/password
Receive address: receiver's email address. Here user can add at least three mail addresses.
Click TEST button to test the valid of the mailbox.
Attaching image amount: user can attach at most three images at one time.
Snap Time Interval(s): User can select snap time interval.
"Strongly recommend to use Google mail (gmail)"
For Example:
SMTP Server: smtp.gmail.com
Port: 465
SSL Check: V
Send Address: alan@gmail.com
Receive Address1: test@yahoo.com
DV-8_HDRS-04-1U / DV-9_HDRS-08-2U / DV-10_HDRS-16-2U User's Manual
16CH
Fig 4-32 network configuration-sub stream
Fig 4-31 network configuration-email
24 R201304-V10