P.t.z Configuration - Okina HDRS-04-1U User Manual

② Authority:
a) Admin: Admin have full control of DVR. DVR could have only one admin account.
b) Advance: Besides "firmware upgrade", "reset factory default", "shut down" and "change other
user's password", advance account could control DVR like an admin account.
c) Normal: Normal account can only do "live view", "playback", "search", "backup", "log off", "view
DVR information", and "change his own password".

4.8 P.T.Z configuration

P.T.Z configuration includes two submenus: serial port and advance
① Serial port
Step1: enter into system configurationP.T.Z configurationserial port; refer to Fig 4-36:
Step2: tick off Enable, setup the value of address, baud rate and protocol according to the settings of the speed
dome.
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit
current interface.
Definitions and descriptions of network stream:
Parameter
Address The address of the PTZ device
Baud rate
Baud rate of the PTZ device. Range form: 110、 300、 600、 1200、 2400、 4800、 9600、 19200、
34800、57600、115200、230400、460800、21600.
Communication protocol of the PTZ device. Range from: NULL、 PELCOP、 PELCOD 、 LILIN、
Protocol
MINKING、NEON、STAR、VIDO、DSCP、VISCA、SAMSUNG、RM110、HY
② Advance
Step1: enter into system configuration P.T.Z configurationadvance; refer to Fig 4-37:
DV-8_HDRS-04-1U / DV-9_HDRS-08-2U / DV-10_HDRS-16-2U User's Manual
Fig 4-36 P.T.Z configuration-serial port
Meaning
Fig 4-37 P.T.Z configuration-advance
26 R201304-V10