Delete Lap Times; Choice Of The Circuit; Circuit Detail - I2M Chrome User Manual

the best speed is reported.
The all-time best lap and ideal time for the current circuit are shown in the lower part of the screen.
ATTENTION: If the position of the split times on the map is changed, the previously stored lap
times still remain referred to the old position.
ATTENTION: The best and ideal lap displayed in the lower part of the screen refers to the selected
circuit and not only to the shown times. As will be discussed in the section that describes the
cancellation, it is possible to delete lap times leaving the best and ideal lap stored, or vice versa. In
both cases, it would be reasonable to have no more correspondence between the all-time best lap
and the best lap in the list.

4. Delete lap times

The "Delete" menu allows to select which information has to be deleted. Indeed, it is possible to
delete only the best time relative to the selected circuit, or the list of times, the ideal time or all the
times stored in the memory. Keep the DN button pressed to select an option, then follow the
instructions on the screen to confirm the cancellation.

5. Choice of the circuit

DN button pressed to select the circuit, keep the UP button pressed to return to the previous menu.

6. Circuit detail

In the "Circuit detail" menu the information about the loaded circuit is reported. In this menu the
number of stored laps, best and ideal lap times and highest speed are shown.
The "Circuits" menu shows the list of the circuits
stored inside Chrome. Chrome is able to store
up to 20 different circuits. For each one the best
lap, the number of stored laps and the higher
speed are collected in a table.
Thanks to the automatic identification of the
circuit, Chrome recognizes the circuit where it is
located. Using this menu it is also possible to
choose a different circuit. Press the UP and DN
buttons to scroll through the circuits, keep the