Startup Screen; Plug&Play Kit - I2M Chrome User Manual

Startup screen

When Chrome is turned on, the startup screen is shown (see the figure below). The GPS
indicator, in upper-left corner, is visible (about 4 seconds after the screen appearance) if the GPS
receiver is connected. If the indicator is not visible, please check the connection.
When the GPS indicator is red, it means that the GPS receiver is connected but a valid position
has not been found yet. As soon as the GPS signal becomes valid, the indicator will show the
signal power through a bar diagram.
"Rec" message appears below the GPS indicator when the system is recording data.
The tachometer limits and all the other items shown in the startup screen can be fully configured.
The speed gauge, placed in the upper-right corner, can be configured to show alternatively the
temperature (see the "display view" section).
Plug&Play Kit
If your bike is included in the list of motorcycles for which a Plug & Play harness is available, the
Chrome will be provided with the appropriate additional board. All the kits are simply made of a
board that allows to connect the wiring of the Chrome directly to the connector of the original
dashboard (except for the BMW S1000RR).