I2M Chrome User Manual page 13

-­‐ BMW S1000RR >2012 and HP4: the Plug & Play harness for BMW is different from the
previous ones and provides an additional wiring. The additional wiring has to be connected to
the DWA connector in the motorcycle tail and to the fuel level sensor under the tank
(replacing the original). The other side of the Plug & Play harness has to be connected to
Chrome to the corresponding CAN BUS pins in the 20-pin Chrome connector.
Therefore it is necessary to make a jumper in the white connector pin 1 and 2 (see pic a on
previous page) to enable the power on. In order to enable the ABS/TC button on the left
block, which is the only one working in "RACE" configuration, it is necessary to restore its
ground connection making a second jumper between the white connector pin 6 and the black
connector pin 7 (as shown in pic c).
Setting load
After the electrical connection it is necessary to load the related settings. Use the "Analog and
digital inputs" menu, select "configure inputs" and choose "automatic configuration". In the first row
choose "kind of bike" among the possible choices. Select your type of bike; choose your specific
model (if listed) otherwise set the brand (for Kawasaki ZX 10R> 2010 Kawasaki select Kawasaki
CAN BUS).
If the model of your bike is not listed and the related settings have not been preloaded, it is
necessary to import the settings through a USB key. In order to accomplish this task take an empty
USB key, make sure that the key formatting is FAT32, then copy in the USB key the file
ChromeSettings.cfg of your bike model (request it at info@i2m.it).
Connect the USB key to the USB input of the Chrome and select "Import settings from USB" in the
"Analog and digital inputs" menu.
Ducati 1198 / Kawasaki ZX 10R / BMW S1000RR settings
When the settings for Ducati 1198, Kawasaki ZX10R >2010 and BMW S1000RR are loaded, also
additional functions will be imported.
Ducati 1198
In the case of Ducati 1198, the "Real time" menu in the "analog and digital inputs" menu is
changed to "Real-time input & diagnosis". By entering this menu, the page of the analog inputs can
(c)