Delete Lap Times; Select Circuit; Circuit Details; Daily Details - I2M Chrome Lite User Manual

cancellation, it is possible to delete lap times leaving the best and ideal lap stored, or vice versa. In both
cases, it would be reasonable to have no more correspondence between the all-time best lap
and the best lap in the list.

Delete Lap Times

The "Delete" menu allows to select which information has to be deleted. Indeed, it is possible to delete only
the best time relative to the selected circuit, or the list of times, the ideal time or all the times stored in the
memory. Keep the DN button pressed to select an option, then follow the instructions on the screen to
confirm the cancellation.

Select Circuit

The "Circuits" menu shows the list of the circuits stored inside Chrome. Chrome is able to store up to 20
different circuits. For each one the best lap, the number of stored laps and the higher speed are collected
in a table. Thanks to the automatic identification of the circuit, Chrome recognizes the circuit where it is
located. Using this menu, it is also possible to choose a different circuit. Press the UP and DN buttons to
scroll through the circuits, keep the DN button pressed to select the circuit, keep the UP button pressed to
return to the previous menu.

Circuit Details

In the "Circuit detail" menu the information about the loaded circuit is reported. In this menu the number of
stored laps, best and ideal lap times and highest speed are shown. The maps, which are automatically
generated by the system, are displayed on the left part of the screen. If there is no corresponding map
stored in the memory, Chrome starts to draw the map the first time the finish line is crossed and it stops
when the finish line is crossed again. If the lap is not completed, the map will not be saved. It is possible to
remove the auto generated maps selecting the "remove map" function.
The configurable parameters for the circuit are shown in the lower part of the screen. The name of the
circuit can be changed using the first line: this option makes possible to modify each letter of the name.
Keep the DN button pressed to switch character, press the UP and DN buttons to scroll through the letters
and keep the UP button pressed to exit. The finish line and splits can be set by using the three subsequent
entries. It is possible to select one of these options to manually set the finish line (in this case the finish line
has to be crossed without stopping) or, if the map is available, to set the finish line or the splits by choosing
the desired position on the map. Indeed, it is possible to move the cursor, through the map, using the UP
and DN buttons until the desired position. The "Auto" option automatically sets the finish line when the 150
Km/h speed is exceeded. The first split can be set only if the finish line was stored. Similarly, the second
split can be set only if the first split was stored.
WARNING: do not use space or special characters in circuit names

Daily Details

The "Daily details" menu summarizes the current day performance. Therefore, it is possible to analyze the
number of performed laps, the highest speed, the best and ideal laps and the spread between the latter
and the all-time best and ideal laps.
Export & Import
Thanks to this menu it is possible to manage the downloading/uploading of data collected during the
chronometer functions. It is possible to download the stored circuits by using a USB flash drive in order to
save the new finish line in a file compatible with Danas. Similarly, it is possible to load a circuit list by using
a USB flash drive, replacing the circuits stored in Chrome. The file must be generated by selecting the
proper option in the Danas software and then transferred using a USB flash drive. Choosing "export lap
times to USB", a .txt file, including the total and split lap times and the highest speeds, all organized in
sessions, is generated.
19
www.i2m.it/en