Navigating And Selecting In Computer Setup - HP EliteBook 820 G1 Maintenance And Service Manual

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
To select a menu or a menu item, use the
●
press enter, or use a pointing device to click the item.
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
●
screen, or use the up arrow key or the down arrow key on the keyboard.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
●
then follow the on-screen instructions.
NOTE:
keyboard to navigate and make selections in Computer Setup.
2. Press
To exit Computer Setup menus, choose one of the following methods:
To exit Computer Setup menus without saving your changes:
●
Click the Exit icon in the lower-right corner of the screen, and then follow the on-
screen instructions.
– or –
Use the
press enter.
To save your changes and exit Computer Setup menus:
●
Click the Save icon in the lower-right corner of the screen, and then follow the on-
screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
128 Chapter 7 Computer Setup (BIOS)
You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
f10 to enter Computer Setup.
tab key and the arrow keys to select Main > Ignore Changes and Exit, and then
esc while the "Press the ESC key for Startup Menu"
tab key and the keyboard arrow keys and then
ENWW