How To Use The Menu - Furuno FSV-85 Operator's Manual

1. OPERATIONAL OVERVIEW
1.7

How to Use the Menu

Most operations are carried out from the menu. This section provides basic menu op-
erating information.
1. Press the MENU/ESC key to open the main menu.
Menu title
Select "Shortcut Menu"
to show the menu title
you programmed.
(See section 6.1.)
Note: You can also show the main menu by pushing the right-click button to show
the pop-up menu. See page 1-14.
2. Operate the trackball to place the arrow cursor on the item you want to select. The
yellow cursor marks the current selection. You can also use the scrollwheel to se-
lect a menu item.
3. Push the left-click (or right-click, scrollwheel) button. If you selected [TX/RX Set-
ting] at step 2 for example, the following menu appears.
Scanning mode tab
4. Press the H/S/V key to select the display mode.
• H1, H2 tab: Items for horizontal display setting
• S tab: Items for the slant display setting
• V tab: Items for the vertical display setting
Items which you cannot set are shown in gray.
5. Select the item then push the left-click button.
1-12
The descriptions for the selected item appears in this field.
This icon means
that this item is
assigned to a
function key.
(Numeric window) (Item window)
Select QUIT with
trackball and then left
click to close the menu.
"..." means that this
item has sub menus.