Furuno FSV-85 Operator's Manual page 32

2. HORIZONTAL MODE
2. If necessary operate the TILT control to change center tilt angle.
In automatic tilt, "AUTO" is displayed at the top right corner. To disable automatic
tilt, select OFF at step 1.
Range (m)
60, 100
150, 200
300, 400
500, 600
700, 800
900, 1000
Over 1100
Range (m)
60, 100, 150
200
300, 400
500, 600
700, 800
900, 1000
Over 1100
For example, when the RANGE control, TILT control and AUTO TILT key are set to
800 m, 8° and width (1) respectively, the tilt angle changes at each transmission as
follows: 8°→ 9°→ 8°→ 7°→ 8°.
Note 1: The AUTO TILT key is inoperative when the target lock function is active or
is made active. Auto tilt is available when the target lock is OFF.
Note 2: If the picture set with auto tilt is not visible, disable auto tilt and try again.
2-6
H
R 400m
N-UP
°
T 17
AUTO
°
(21 )
G 10
P 8
Automatic tilt angle (narrow) with AUTO TILT key
Width 1 Width2
±4°*; ±6°*
±2° ±4°
±1° ±2°
±1° ±2°
±1° ±2°
±1° ±2°
±1° ±2°
Automatic tilt angle (wide) with AUTO TILT key
Width 1 Width2
±10° ±16°
±10° ±16°
±10° ±16°
±8° ±16°
±6° ±12°
±4° ±8°
±2° ±4°
Auto tilt is active
Current tilt angle
Width3
±8°* Period: One transmission
±6°* Note: Tilt angle changes in 2° in-
±4°* crements for asterisk-marked
±3° width; 1° increments for all other
±3° widths.
±3°
±3°
Width3
±20° Period: One transmission
±20°
±20°
±20°
±16°
±12°
±6°
Set tilt angle
Period
Period