Table of Contents
Advertisement
Operation
Scanner settings
+
The
resolution:
+
The
resolution:
the
+
The
original and the zoom value to apply to the document, 25 to 400%. Enter the zoom value
required using the keys of the digital key pad. Validate the choice with the OK key.
+
The ASSEMBLED parameter is used to define the choice of your printer outputs; either
assembled or not assembled. Validate the choice with the OK key.
+
If you wish, you can change the origin of the scanner.
+
By entering new values of X and Y given in mm (X < 210 and Y < 286), you will move
the scanning zone as shown on the figure below.
+
Select the X and Y coordinates with
+
Set the required coordinates with the numeric keypad or
by pressing key OK.
+
The
using keys
841 OK - ADVANCED FCT / COPY / B&W RESOLUTION
setting to adjust the resolution for photocopying. Select the
B&W RESOLUTION
ULTRA FAST
or
, keys, validate your choice by pressing the OK key.
842 OK - ADVANCED FCT / COPY / COLOUR RESOL.
. setting to adjust the resolution for photocopying. Select the
COLOUR RESOL
,
DRAFT
TEXT
keys, validate your choice by pressing the OK key.
or
setting is used to reduce or enlarge part of the document by choosing the
ZOOM
y
x
parameter is used to select the photocopy contrast. Adjust the contrast
CONTRAST
, then validate the choice with the OK key.
and
5-17
,
, FAST
QUALITY
, TEXT/PHOTO
843 OK - ADVANCED FCT / COPY / ZOOMING
844 OK - ADVANCED FCT / COPY / ASSEMBLED
845 OK - ADVANCED FCT / COPY / ORIGIN
or
keys.
846 OK - ADVANCED FCT / COPY / CONTRAST
or
by means of the
PHOTO
or
by means of
PHOTO
Scanned area
or
. Confirm your setting
Advertisement
Table of Contents
