Table of Contents
Advertisement
Setting your machine
To set the technical parameters:
+
Select the desired parameter and confirm with OK.
+
With the
press OK.
Parameter
1 - SCANNING
MODE
2 - TX HEADER
3 - TX SPEED
4 - ECHO PROTECT
6 - EPT MODE
7 - COM. DISPLAY
8 - ECO ENERGY
10 - RX HEADER
or
keys, modify the parameter settings by following the table below and
Setting
1 - NORMAL
Default value of the scan mode resolution for the documents
2 - FINE
to be transmitted.
3 - SFINE
4 - PHOTO
1 - WITH
If this parameter is on, your header will appear on all
2 - WITHOUT
documents sent to your subscribers with your name, number,
date and number of pages.
Warning: If you send a fax from the document loader, the
transmission header will not appear on the document your
correspondent receives.
1 - 33600
Transmission speed for outgoing documents.
2 - 14400
For a quality telephone line (compatible, no echo),
3 - 12000
communications occur at maximum speed.
4 - 9600
However, it may be necessary to restrict the transmission
5 - 7200
speed for some calls.
6 - 4800
7 - 2400
1 - WITH
If this parameter is on, the on-line echo will be reduced during
2 - WITHOUT
long distance calls.
1 - WITH
For some long distance calls (satellite), the on-line echo may
2 - WITHOUT
disturb the call.
1 - SPEED
Choice between transmission speed displayed or number of
2 - PAGE NUMBER
the page in progress.
1 - WITHOUT
Choosing the printer standby delay: the printer will switch to
2 - DELAY
standby after a delay (in minutes) of NON-operation or during
5 MIN
the period of time of your choice.
3 - DELAY
15 MIN
4 - DELAY
30 MIN
5 - DELAY
60 MIN
1 - WITH
If this parameter is on, all documents received by your fax
2 - WITHOUT
will include the subscriber's header with his name, number (if
available) fax print date and the page number.
3-9
29 OK - SETUP / TECHNICALS
Signification
Advertisement
Table of Contents
