Cleaning The Printer - Utax CLP 3416 MFP Instruction Handbook Manual

Digital multifunctional system
Table of Contents

Advertisement

Maintenance
Cleaning the scanner's reading devices
When one or more vertical lines appear on transmitted copies or faxes, follow these steps:

Cleaning the printer

Clean the outside of the printer by means of a soft cloth dampened with neutral household
detergent.
Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.
Note:
If the message "Clean Printer Press GO" appears after replacing the toner cartridge. Carry out the printer
cleaning procedures (corona, grille, etc.) described in the paragraph General Information, on page 6-2
then press the GO button. The message will disappear and the printer will be ready to print.
C
LEANING
6-15
+
Open the scanner cover by
pushing it backwards until held
vertically in position
+
Clean
the
two
scanning windows with a soft,
lint-free cloth, dampened with
alcohol.
+
Close the scanner cover.
+
Make a copy to check that the
symptoms have been cleared.
transparent

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clp 3524 mfpClp 3316Clp 3520

Table of Contents