External Fl Ash Units Designated For Use With This Camera; Wireless Remote Control Fl Ash Photography - Olympus E-M5Mark II Instruction Manual

External fl ash units designated for use with this camera
With this camera, you can use one of the separately sold external fl ash units to
achieve a fl ash suited to your needs. The external fl ashes communicate with the
camera, allowing you to control the camera's fl ash modes with various available fl ash
control modes, such as TTL-AUTO and Super FP fl ash. An external fl ash unit specifi ed
for use with this camera can be mounted on the camera by attaching it to the camera's
hot shoe. You can also attach the fl ash to the fl ash bracket on the camera using the
bracket cable (optional). Refer to the documentation provided with the external fl ash
units as well.
The upper limit of the shutter speed is 1/200 sec. when using a fl ash*.
* FL-50R only: 1/180 sec.
Functions available with external fl ash units
Optional fl ash
TTL-AUTO, AUTO, MANUAL,
FL-600R
FP TTL AUTO, FP MANUAL
FL-300R TTL-AUTO, MANUAL
FL-14 TTL-AUTO, AUTO, MANUAL
RF-11
TTL-AUTO, MANUAL
TF-22
*1 The focal length of the lens that can be used (Calculated based on 35 mm fi lm camera).
Wireless remote control fl ash photography
External fl ash units that are designated for use with this camera and have a remote
control mode can be used for wireless fl ash photography. The camera can control
the supplied fl ash unit and remote fl ash units in up to three separate groups. See the
instruction manuals provided with the external fl ash units for details.
1
Set the remote fl ash units to RC mode and place them as desired.
• Turn the external fl ash units on, press the MODE button, and select RC mode.
• Select a channel and group for each external fl ash unit.
2
Select [On] for [# RC Mode] in X Shooting Menu 2 (P. 85 ).
• The LV super control panel switches to RC mode.
• You can choose an LV super control panel display by repeatedly pressing the INFO
button.
• Select a fl ash mode (note that red-eye reduction is not available in RC mode).
Flash control mode GN (Guide number) (ISO100)
GN36 (85 mm* ) GN20 (24 mm*
1
GN20 (28 mm* )
1
GN14 (28 mm* )
1
GN11
GN22
RC mode
)
1


–
–
–
9
EN 141