Olympus E-M5Mark II Instruction Manual page 108

Z Movie
Option
Time Code
Settings
4
n Info Settings
Movie
Specifi cation
Settings
Movie Effect
Movie+Photo
Mode
nShutter
Function
108 EN
Set the time codes to record when shooting a movie.
[Time Code Mode]: Set [DF] (drop frame) to record time
codes corrected for errors with respect to recording time
and [NDF] (no drop frame) to record uncorrected time
codes.
[Count Up]: Set to [RR] (Rec run) to use time codes that
only run during recording and [FR] (Free run) to use time
codes that also run when recording has stopped, including
when the camera is powered off.
[Starting Time]: Set a starting time for the time code. Set
[Current Time] to set the time code for the current frame to
00. To set to 00:00:00:00, select [Reset]. You can also set
time codes using [Manual Input].
Time code is not recorded when the record mode for the
movie is Motion JPEG (H or I).
You can select the content of the information displayed on
the movie recording screen. To hide an item, select the item
and press Q to clear the checkmark.
You can set combinations of movie image size and
compression format/bit rate in SET1 to SET4. After
performing these settings, you can select them in movie
image quality mode (P. 62).
[Image Size]: Select between [FHD] (Full HD) and [HD].
[Compression/Bit Rate]: Select from [A-I](All-Intra)/[SF]
(Super Fine)/[F](Fine)/[N](Normal).
Choose [On] to enable movie effects in n mode.
Choose the way in which photographs are taken during
movie recording.
[mode1]: Take photographs during movie recording without
stopping recording.
[mode2]: Stop recording to take photographs. Recording will
resume after the photograph is taken.
In mode2 and certain shooting modes, it is only possible to
capture a single-frame as a picture during recording. Other
shooting functions may also be limited.
If the record mode for the movie is Motion JPEG (H or
I), the camera is set to mode2.
In movie mode, the following shutter button options are
available.
[mode1]: Use the shutter button to shoot still images.
[mode2]: Press the shutter button all the way down to start
and stop movie recording. In mode2, you cannot control
recording using the R button.
Description
Z
c
MENU
g
—
—
—
40
41
—