9
Using separately sold accessories
Power Battery Holder (HLD-8)
You can extend camera usage time by using the power battery holder with the
camera's battery. You can assign functions to the camera's custom menu using the dial
and Fn button. You can use an AC adaptor (sold separately) via the HLD-8.
You can remove the battery portion from the HLD-8 and attach only the grip portion to
the camera body.
Be sure to turn off the camera's power when attaching or removing the power battery
holder.
Names of parts
Vertical operation lock knob
Attaching the HLD-8
a
Grip portion (HLD-8G)
Remove the PBH cover (a) on the bottom of the camera and attach the HLD-8G. Once
the HLD-8G is attached, turn the release wheel fi rmly. Be sure to put the PBH cover on
the camera when the HLD-8G is not attached.
Next, remove the PBH cover (b) on the bottom of the grip and attach the battery part.
Installation is similar to that for the grip.
Release wheel
B-Fn2 button
B-Fn1 button
a
Headphone jack cover
AC connector cover
Shutter button
Front dial
Shutter button
Front dial
Rear dial
b
Grip portion (HLD-8G)
b
Battery portion (HLD-6P)
9
EN
EN
139
139