Taking Photographs During Movie Recording (Movie+Photo Mode); Using The Silencing Function When Shooting A Movie - Olympus E-M5Mark II Instruction Manual

Movie Tele-converter
1
Touch the icon to display the zoom frame.
• You can change the position of the zoom frame by touching the screen or using
FGHI.
• Press and hold Q to return the zoom frame to a central position.
Touch M or press the Fn2 button to zoom in on the area in the zoom
2
frame.
• Touch N or press the Fn2 button to return to the zoom frame display.
3
Touch O or press Q to cancel the zoom frame and exit Movie tele-
converter mode.
Cautions
• The frame rate will drop slightly during recording.
• The 2 effects cannot be applied simultaneously.
• Use a memory card with an SD speed class of 10 or better. Movie recording may end
unexpectedly if a slower card is used.
• When mode1 has been set for taking photographs during movie recording (P. 108 ), you
cannot take photographs while using other movie effects than Movie Tele-converter.
• [e-Portrait] and [Diorama] cannot be used at the same time as Art Fade.
• The sound of touch operations and button operations may be recorded.
• Art Fade cannot be used when shooting clips.
• When shooting slow/quick motion movies, you cannot use other movie effects than Movie
Tele-converter.
 T aking photographs during movie recording (Movie+Photo Mode)
• Press the shutter button during movie recording to record one of the frames of the movie
as a photograph. To end movie recording, press the R button. The photograph and movie
fi les will be recorded separately to the memory card. The record mode of the photographs
will be XN (16:9).
• There is also a way of recording a photograph of a higher quality. g [Movie+Photo
Mode] (P. 108 )
Cautions
• You cannot take photographs while recording clips or slow/quick motion when
[Movie+Photo Mode] is set to [mode1]. Set the frame rate to 30p or less. The number of
photographs may be limited.
• The autofocus and metering used in movie mode may differ from that used to take
photographs.

Using the silencing function when shooting a movie

You can prevent the camera from recording operating sounds that occur due to camera
operations while shooting.
The following functions are available as touch operations.
• Power zoom*/headphone volume/recording volume/aperture/
shutter speed/exposure compensation/ISO sensitivity
* Only available with power zoom lenses
Touch the silent shooting tab to display the function items.
After touching an item, touch the displayed arrows to select
the settings.
Silent shooting tab
42
mm
TC 00:00:00:00 DF
00:02:18 00:02:18
2
EN 41