External Fl Ash Units Designated For Use With This Camera - Olympus E-M1 MARK II Instruction Manual

External fl ash units designated for use with this camera
With this camera, you can use one of the separately sold external fl ash units to
achieve a fl ash suited to your needs. The external fl ashes communicate with the
camera, allowing you to control the camera's fl ash modes with various available fl ash
control modes, such as TTL-AUTO and Super FP fl ash. An external fl ash unit specifi ed
for use with this camera can be mounted on the camera by attaching it to the camera's
hot shoe. You can also attach the fl ash to the fl ash bracket on the camera using the
bracket cable (optional). Refer to the documentation provided with the external fl ash
units as well.
The upper limit of the shutter speed is 1/250 sec. when using a fl ash.
* The sync speed for silent mode and focus bracketing (P. 94) is 1/50 second. The sync
speed at ISO sensitivities of 8000 and above and during ISO bracketing (P. 94) is
1/20 second.
Functions available with external fl ash units
Optional fl ash
7
FL-900R
FL-600R
FL-300R
FL-14
STF-8
*1 The focal length of the lens that can be used (Calculated based on 35 mm fi lm camera).
152 EN
Flash control mode
TTL-AUTO, AUTO,
MANUAL, FP TTL
AUTO, FP MANUAL,
MULTI, RC, SL AUTO,
SL MANUAL
TTL-AUTO, AUTO,
MANUAL, FP TTL
AUTO, FP MANUAL
TTL-AUTO, MANUAL
TTL-AUTO, AUTO,
MANUAL
TTL-AUTO, MANUAL
GN (Guide number) (ISO100)
GN58 (200 mm* 1 )
1
GN36 (85 mm* ) GN20 (24 mm*
GN20 (28 mm* 1 )
1
GN14 (28 mm* )
GN8.5
RC mode


1
)

–
