Test Picture - Olympus E-M5Mark II Instruction Manual

F
k ISO / j WB
k WB / j ISO
AEL/AFL
R REC
z (Preview)
k (One-touch white
balance)
P (AF area)
P Home
MF
RAWK
K TEST (Test Picture)
Myset1 – Myset4
I/H
Live Guide
b (Digital Tele-
converter)
D (Keystone
compensation)
a (Magnify)
Adjust exposure compensation.
Adjust ISO sensitivity using the front dial and white balance
using the rear dial.
Adjust white balance using the front dial and ISO sensitivity
using the rear dial.
AE lock or AF lock. The function changes according to the
[AEL/AFL] setting. When AEL is selected, press the button
once to lock the exposure and display u on the monitor.
Press the button again to cancel the lock.
Press the button to record a movie.
Aperture is stopped down to the selected value while the
button is pressed. If [On] is selected for [zLock] in Custom
Menu, the aperture is held at the selected value even when
releasing the button.
The camera measures white balance when the button is
pressed (P. 56 ).
Choose the AF target.
Pressing the button selects the AF target position saved with
[P Set Home] (P. 100 ). Press the button again to return to
AF target mode. If the camera is turned off when the home
position is selected, the home position will be reset.
Press the button to select manual focus mode. Press the
button again to restore the previously selected AF mode.
Press the button to toggle between JPEG and RAW+JPEG
record modes.
Pictures taken while the button is pressed are displayed in the
monitor but are not recorded to the memory card.
Switches among the registered Myset settings when the
button is pressed. Press the button again to return. The
shooting mode will change regardless of the position of the
mode dial.
The button can be used to choose between I and H while
the underwater case is attached. Press and hold the button
to return to the previous mode. If you assign this function to
a button, switching between I and H while using a lens
with power zoom functionality will automatically set lens to the
WIDE end or TELE end.
Press the button to display live guides.
Press the button to turn digital zoom on or off.
Press the button once to display options for keystone
compensation and again to save changes and exit. To resume
normal photography, press and hold the selected button.
Press the button to display the zoom frame. Press again to
magnify the image. Press and hold the button to turn off the
zoom frame.
2
EN 67