Olympus E-M5Mark II Instruction Manual page 68

Peaking
AF Stop
j/Y
2
#
HDR
BKT
Multi Function
GLock (Touch panel
lock)
Electronic Zoom
u (Monitor switching)
V Level Disp
* Multi function: b (Highlight&Shadow Control), c (Color Creator), e (ISO sensitivity/
White balance), f (White balance/ ISO sensitivity), a (Magnify), d (Image Aspect)
 Multi-function button (Multi Function)
When framing pictures in the viewfi nder, you can adjust settings quickly using the
multi-function button. At default settings, the Fn2 button is assigned the role of the
multi-function button.
Choosing a function
1
Press and hold the button to which the multi-function
has been assigned and rotate the dial.
• The menus are displayed.
2
Keep rotating the dial to select the desired function.
• Release the button when the desired function is selected.
68 EN
Each press of the button switches the monitor between
display/non-display. When Peaking is displayed, histogram
and highlight/shadow display are not available.
When using Peaking, you can change colors and emphasis by
pressing the INFO button.
Stops autofocus.
Choose a sequential shooting or self timer option.
Choose a fl ash mode.
Switches to HDR shooting with the saved settings.
Turns on BKT shooting using stored settings.
Press the button to recall the selected multi function*. When
switching recalled functions, press the button while turning the
dial. g "Multi-function button" (P. 68)
Press and hold the button to enable and disable touch panel
operation.
When using a lens with a power zoom function, after pressing
the button, use the arrow pad for zooming operations.
Press this button to switch between displaying/hiding the
preview. If the eye sensor is disabled, it switches between
monitor display and EVF display.
Press the button to display the level gauge and press it again
to turn off the level gauge. The level gauge is available when
[Style 1] or [Style 2] is set in [Built-in EVF Style].
Highlight&Shadow Control
P