Safety Information - unGer nLite Hydro Power HP06T Installation & Operating Instructions Manual

Safety Information

General:
Please observe applicable rules and regulations, including all accident prevention
procedures. Unger is not liable for damage to application areas, plumbing
system components nor persons.
Ensure application area has sufficient water drainage.
If unit will be idle for a prolonged period of time, ensure feed water supply is shut-off.
Transportation:
Ensure unit is properly secured to trailer, van or truck bed.
The window cleaning contractor shall meet all applicable liscensing requirements
and strictly adhere to all laws regarding labor and safety regulations.
Intended Use:
This device may cause danger if it is improperly installed, not regularly
maintained or not used as intended. Use this device only for water treatment
to reach an optimal water quality for glass and facade cleaning. Any other use,
especially water treatment for food production (ex. beverages) or drinking water
consumption is prohibited.
Drinking water supply connections may require a back-check valve, preventing
back flow into plumbing supply line.
When operating with water other than from a drinking water supply (ex. well),
a water analysis must be performed prior to start-up to determine if water
source is suitable. Excess impurities may have an adverse effect on the sytem
performance and cleaning result.
General Information
The window cleaning contractor should meet all applicable local, state/provincial
and federal licensing and registration requirements.
The window cleaning contractor should strictly adhere to all applicable local,
state/provincial and federal labor laws and safety codes and standards.
4
Installation &
Operating Instructions