Introduction; General Information; Intellectual And Industrial Property Rights; Property And Legal Deficiencies - unGer HydroPower RO35C Operating Instructions Manual

Table of Contents

Advertisement

T

1 Introduction

1.1

General information

This manual allows you to use the HydroPower RO safely and efficiently.
The operating instructions are part of the HydroPower RO and must be kept accessible to the personnel in
the immediate vicinity of the HydroPower RO at all times.
Before starting work, the personnel must have read and understood this manual. All safety instructions
and instructions for use stated in this manual must be followed for safe operation.
The current version of the HydroPower RO is described in this manual. If changes or additions become
necessary over time, the operating instructions will be accompanied by a supplement which will be
incorporated into the next revision.
The respective revision status of the operating instructions is displayed on the cover sheet. The first user
manual has the revision status „1.0". The status is increased by „1" for each revision.

Intellectual and industrial property rights

1.2
All contents of this manual are the intellectual property of Unger Germany GmbH and are protected by
copyright law.
The product, as well as the word / image mark, are legally protected.
Any duplication, processing, distribution or transfer to third parties - including, but not limited to - any
kind of exploitation outside of the copyright limits require the written consent of Unger Germany GmbH.
In the case of infringements, Unger Germany GmbH reserves the right to take legal action at any time.
We reserve the right to make changes to this manual, as well as changes to technical details, with regard
to the specifications and illustrations in this manual.

Property and legal deficiencies

1.3
Claims for material and legal deficiencies presuppose that the operator shall submit the defect in writing
without delay, but at the latest within two working days.
Unger Germany GmbH is in no case responsible for damage to the system itself, or damage caused by the
unit due to improper handling of the product.
In particular, Unger Germany GmbH is not responsible for failures or errors caused by modifications to the
unit by the customer or other persons.
If Unger Germany GmbH is responsible for a defect, Unger Germany GmbH shall repair or replace the unit
at its discretion.
Claims for material and legal deficiencies will be nullified in the case of non-compliance with the
individual regulations of this manual, the relevant legal provisions, as well as further recommendations
given by Unger Germany GmbH.
4
HydroPower® RO35C
Introduction
www.ungerglobal.com

Advertisement

Table of Contents
loading

Table of Contents