Installing The Driver For An Onboard Graphics Card - Lenovo ThinkServer RS140 Operating System Installation Manual

1. Download the driver for Ethernet card from the Lenovo Support Web site. If the driver is a compressed
file, unzip it to a folder. The most up-to-date device drivers for various server models are always
available for download on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to a USB storage device and connect the USB storage device to
your server.
3. Log in to the operating system.
4. In the Device Manager window, right-click the Ethernet card which you want to install drivers for.
5. Click Update Driver Software ➙ Browse my computer for driver software.
6. Go to the folder where the driver is stored, click OK, and then click Next. The installation begins.
Note: If prompted, select Always trust software from Qlogic Corporation and click Install.
7. When the installation is completed, click Close.
If your server is installed with an LSI9240-8 or LSI9260-8I RAID card and you want to install the driver
for an Ethernet card, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. Read the license terms, and click Accept. The welcome or ThinkServer EasyStartup window is
displayed.
3. Click Drivers Install.
4. Select your server model from the Server Model drop-down list box, the operating system from the
Operating System drop-down list box, and the driver from the Select a Driver drop-down list box.
5. Click Install to install the driver.
Note: If prompted, click Yes.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. Read the license terms, and click Accept. The welcome window is displayed.
3. Click Driver Installation (or Drivers Install in some operating systems).
4. Select your server model from the Server Model drop-down list box, the operating system from the
Operating System drop-down list box, and the driver from the Select a driver (or Please Select
Driver in some operating systems) drop-down list.
5. Click Install.
Note: If prompted, click Yes.
6. In the "Welcome to the Setup Program" window, click Next. The License Agreement window is
displayed.
7. Click Yes. The Readme File Information window is displayed.
8. Click Next.
10
ThinkServer RS140 Operating System Installation Guide