Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
Do not open the roll paper cover during printing or autocutting.
Do not touch the manual cutter with your hands when installing or replacing the
CAUTION
Use roll paper that meets the printer specification. For details about paper specification,
Paper must not be pasted to the roll paper core.
1
Open the roll paper cover by using the cover open lever.
2
Remove the used roll paper core, if it is installed.
The printer may be damaged.
roll paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
see
"Paper Specifications" on page
25.
Cover open lever
Chapter 4 Handling
4
81