Connecting The Buzzer Unit - Epson TM-T20II Technical Reference Manual

Connecting the Buzzer Unit

The buzzer unit is recommended to be installed in the following positions.
• When using the printer horizontally: either side
• When using the printer vertically:
• When using the printer on the wall:
Horizontal installation
 Do not install the buzzer unit at the roll paper exit.
 To prevent liquid from entering inside, it is recommended to install the buzzer unit so that
1
Turn off the printer.
2
Clean and dry the printer case where the buzzer unit will be installed.
3
With 2 included pieces of the affixing tape combined, peel off the
backing paper on one side, and stick the tape in the center of the
attaching surface of the buzzer unit.
56
side or top
side, top, or bottom
the volume adjustment knob is positioned sideways or downward.
Vertical/Wall-hanging installation
Affixing tape