Attaching Cover On The Power Switch - Epson TM-T20II Technical Reference Manual

Attaching Cover on the Power Switch

Install the power switch cover that comes with the TM-T20II onto the printer to prevent
inadvertent operation of the power switch and to prevent tampering. To reset the printer when
the power switch cover is installed, insert a long, thin object (such as the end of a paper clip) into
the hole in the power switch cover and press the power switch.
A waterproof cover for the power switch can also be attached.
If an accident occurs with the power switch cover attached, unplug the AC cable
immediately.
Continued use of the printer may cause fire or shock.
WARNING
Use the power switch waterproof cover if the printer is installed in a humid location or
exposed to water. If current leakage occurs, it could result in electric shock.
To use these covers, install them as shown in the illustration below.
36
Power switch
cover
Power switch
waterproof cover