Doro PRIMO 365 Operating Instructions Manual page 10

Hide thumbs Also See for PRIMO 365:

Table of Contents

1. Remove the cover from the battery compartment by

sliding your fingernail into the small notches on the

side of the bottom of the phone and pulling the cover

upward.

If the battery is installed, slide your fingernail in the

notch next to the emergency call button and lift one

side of the battery to remove it.

2. Insert the SIM card by carefully sliding it beneath the

metal bracket. Make sure that the contacts on the SIM

card are facing down and the cut-off edge is aligned

with the depressed shape of the bracket. The con-

tacts of the SIM card must not be scratched or bent. If

possible, do not touch the contacts with your fingers.

3. Micro-SD card

To use the storage-intensive features of your tele-

phone, in particular photos, sounds, etc., a micro-SD

card must be used. A 128MB micro-SD card is part of

the delivery with your device and can be replaced at

any time for a larger one (maximum 8GB).

This is how to insert the memory card into the slot:

Press lightly on the card holder and push it carefully

toward the right edge of the casing. The memory card

bracket can now be flipped up vertically. Place the

memory card positive-locking into the black plastic

Table of Contents