Charging - Doro PRIMO 365 Operating Instructions Manual

CAUTION
Only use batteries, charger and accessories that have
been approved for use with this particular model.
Connecting other accessories may be dangerous and
may invalidate the phone's type approval and guarantee.
If the battery is low, the empty symbol for the battery sta-
tus blinks and a warning signal sounds. To charge the bat-
tery, connect the power supply to an outlet and the char-
ging device jack on the bottom of the telephone or place
the telephone in the charging station connected to the
power adapter.
Charger connected is displayed briefly when the charger
is connected to the telephone and Charger removed is
displayed when it is separated from the telephone. The bat-
tery status display moves while the battery is charging and
the red LED above the right upper corner of the display lights
up. It takes approximately 3 hours to fully charge the battery.
When the battery is fully charged, the red LED on the right
above the display will turn off. Instead, the LED on the left
top will light up blue.

Charging

8