Doro Primo 413 Quick Start Manual

Approval and Conformity Activating the phone
This mobile phone complies with the fundamental requirements of the Hold the read button
R&TTE Directive 1999/5/EC for radio installations and telecommunica- it on/off.
tion transmission devices and is suitable for the connection and opera- If the SIM card is valid but protected with a PIN code (Personal Identifi-
tion in the respective country where the device was sold. cation Number), Enter PIN is displayed.
The declaration of conformity is available on the following website: Enter the SIM PIN code and press OK (
www.ivsgmbh.de Delete with Delete (
The CE symbol confirms the conformity of the telephone with the Setting the language
0700 above directive. The default language of the telephone menu, messages and so on is
determined by the SIM card used. You can always switch between the
You can download the complete user guide as well as the declaration of languages supported by the telephone.
conformity from our website 1. Press Menu, scroll to Settings and press OK.
http://www.ivsgmbh.de/de/support/downloadsauswahl/ 2. Select Phone and press OK.
3. Select Language and press OK.
In case you need support during setup or usage of your mobile phone 4. Select a language from the list and press OK.
you will find the relevant contact details on the following website:
http://www.primobydoro.com/support Setting time and date
1. Press Menu, scroll to Settings and press OK.
2. Select Phone and press OK.
Internet: 3. Select Time and date and press OK.
www.ivsgmbh.de 4. Select Set home city and press OK.
IVS GmbH 5. Select a city from the list and press OK.
Im Frauental 14 • 92224 Amberg 6. Select Set time/date and press OK.
© IVS GmbH 2014 • All rights reserved 7. Enter the time (HH:MM) and press
IVSQSGEN_Primo 413 by Doro - V 1.0 8. Enter the date (DD/MM/YYYY) and press
9. Use * and #, select whether Daylight saving should be turned on
on the telephone for approx. 3 seconds to turn or off and press Save.
Making phone calls
1. Enter the phone number with the area code. You can delete digits
upper left corner of keypad). with Delete.
upper right corner of keypad). 2. Press to dial. Press Cancel to cancel dialling.
3. Press to end the call.
Tip:
For international calls, always enter a + symbol before the country code
to be able to use the address book optimally in any country.
Press the * button twice to enter an international area code.
Answering a call
1. Press or Answer to accept the call or press Reject to reject the
call (busy signal).
Alternatively, you can press
2. Press to end the call.
Creating an entry in the telephone book
1. Press Menu, scroll to Phonebook and press OK.
2. Select Add new contact and press Add.
3. Select whether you want to save the contact on the SIM card or in
the telephone.
4. Enter a name for the contact.
. 5. Press .
. 6. Enter the telephone number including the area code.
7. Press .
8. Optionally, you can select a different ring tone for the contact by
using the keys * and #.
9. Then press Options, select Save and press Select.
Tip:
For international calls, always enter a + symbol before the country code
to be able to use the address book optimally in any country.
Press the * button twice to enter the international area code +.
Emergency calls
If the telephone is switched on, you can make an emergency call at any
time by entering the emergency number valid in the respective country
and then pressing .
In some networks emergency calls are permitted even without a valid
SIM card. For more information contact your network provider.
Note!
to reject the call directly. The SIM card must be registered and activated.
The misuse of the emergency number 112 may be persecuted and
punished with a fine.
Primo 413 by Doro
Display status symbols
Quick Start Guide
Signal strength
Battery charging status
New entries in the call log (missed calls)
An alarm time is set
Bluetooth enabled
Existing GPRS connection
Headset connected
USB connection
MMS is being sent
Only vibration
Sound and vibration
First vibration, then sound
Unread SMS
Unread MMS
Indicates that a micro SD card is inserted.