Location Of Customer Controls - LG L320-BN Service Manual

LOCATION OF CUSTOMER CONTROLS

A C B D E
F
A Lens mount cap
The lens mount of the camera is covered using a
cap to protect it. Remove the lens cap covering the
lens.
B Camera installation bracket
The bracket can be fi xed at the top or bottom of the
camera.
C Flange-back adjustment ring
D Lens iris output connector (LENS)
This 4- pin connector is used to send the Iris control
signal and power supply to an auto-iris type lens.
E Setup menu control buttons
Use these buttons to set the menu options.
F Power input terminal
Supplies AC 24 V or DC 12 V from an external
power source.
G
G Video output connector (BNC type)
Supplies analog video signal (composite) to the con-
H
nected device such as a DVR or monitor.
H Power indicator
Lights when the camera is powered.
1-5