Sony KL-X9200M Service Manual page 16

Adjusting the
picture
(AV MEMORY)
You can adjust the quality of the picture to suit your
taste and store the settings into AV MEMORY.
MENU ENTER
1
Press MENU.
2
Press v or V to select " (VIDEO/AUDIO),"
and press ENTER.
ENTER
3
Press v or V to select VIDEO ADJUST, and
press ENTER.
V I D E O A D J U S T
CONTRAST
ENTER
BRIGHTNESS
COLOR
HUE
SHARPNESS
RESET
EX I T
4
Select the item you want to adjust.
For example:
(1) To adjust the brightness, press v or V to select
BRIGHTNESS.
20 -GB Operations
(2) Press ENTER.
ENTER
BRIGHTNESS
5
Adjust the selected item.
Press v, V, B or b to adjust the item, and press
ENTER.
ENTER
Item Press v or B to Press V or b to
CONTRAST Decrease picture Increase picture
contrast. contrast.
Darken the picture. Brighten the picture.
BRIGHTNESS
COLOR Decrease color Increase color intensity.
intensity.
HUE Make picture tones Make picture tones
purplish. greenish.
SHARPNESS Soften the picture. Sharpen the picture.
6
To adjust other items, repeat steps 4 and 5.
7
Press MENU to return to the original screen.
To reset to the factory preset setting
Select RESET from the VIDEO ADJUST menu, and
press ENTER. See page 26 for additional reset
methods.
80
50
50
0
50
Notes
• When an RGB signal is input, COLOR and HUE cannot be
adjusted.
• You can adjust the items in AV MEMORY for each input from
VIDEO 1, 2 and 3 IN, RGB 1 IN, RGB 2 IN, and COMPONENT
IN.
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
Adjusting the picture in more detail
You can adjust the picture with the DRC (Digital
Reality Creation), H-WHITE and COLOR TEMP
(temperature) options.
50
MENU ENTER
1
Press MENU.
2
Press v or V to select " (VIDEO/AUDIO),"
and press ENTER.
3
Press v or V to select VIDEO ADJUST, and
press ENTER.
V I D E O A D J U S T
ENTER
4
Press v or V to scroll down to RESET, then
press v again.
V I D E O A D J U S T
5
Select the desired item with v or V, then
press ENTER.
ENTER
6
Press v or V to adjust the item, then press
ENTER.
Choose To
DRC (Digital Reality Obtain a finer, more detailed picture
Creation) with four-times higher density than
the conventional NTSC or PAL video
input. You can choose HIGH or LOW
for the desired DRC effect. To cancel
the DRC effect, choose OFF.
H-WHITE Emphasize the white colors of a
picture by turning it ON.
COLOR TEMP (Color Make the white colors warm
temperature) (reddish) in the LOW position or
make the whites cool (bluish) in the
HIGH position.
7
To adjust other items, repeat steps 5 and 6.
CONTRAST 80
BRIGHTNESS 50
COLOR 50
8
HUE 0 Press MENU to return to the original screen.
50
SHARPNESS
RESET
To reset to the factory preset setting
EX I T
Select RESET on the second page of the VIDEO
ADJUST menu, and press ENTER. See page 26 for
additional reset methods.
Notes
• You can adjust the items in AV MEMORY for each input from
DRC HIGH
VIDEO 1, 2 and 3 IN, RGB 1 IN, RGB 2 IN, and COMPONENT
H–WHITE: OFF
COLOR TEMP: MEDIUM
IN.
RESET
• When an RGB signal is input, you cannot adjust DRC and H-
WHITE.
EX I T
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
ENTER
GB
21 -GB
Operations