Specifications - Sony KL-X9200M Service Manual

Lcd projection data monitor
Hide thumbs Also See for KL-X9200M:
Table of Contents

Advertisement

KL-X9200M/X9200U
RM-902

Specifications

(Appendix)
Acceptable signal
Projection system
LCD panel
Lamp
Lens
Screen size (measured diagonally)
Viewable image size
Frequency range
Inputs/outputs
VIDEO 1, 2 and 3 IN S VIDEO (4-pin mini-DIN):
COMPONENT IN
VIDEO OUT
NTSC
/NTSC
/PAL/PAL M
3.58
4.43
/SECAM video signal, switched
automatically
RGB signal
3 LCD panels, 1 lens projection
system
1.3-inch TFT LCD panel
Approx. 2.36 million dots
(786,432 pixels)
1,024 × 768 dots × 3 panels
XL-100M: HID lamp, 100 W
Large diameter hybrid lens F2.4
50 inches
Approx. 50 inches (diagonally)
Approx. 1,016 × 762 mm (w/h)
Horizontal: 24.8 to 85 kHz
Vertical: 50 to 85 Hz
Y: 1 Vp-p, 75 ohms
unbalanced, sync negative
C: 0.286 Vp-p (NTSC burst
signal), 75 ohms
0.3 Vp-p (PAL burst signal), 75
ohms
VIDEO (phono jacks):
1 Vp-p, 75 ohms unbalanced,
sync negative
AUDIO (phono jacks):
2 channels, 500 mVrms
Impedance: more than 47
kohms
VIDEO (phono jacks):
Y: 1 Vp-p, 75 ohms, sync
negative
P
/C
/B-Y: 0.7 Vp-p, 75 ohms
B
B
P
/C
/R-Y: 0.7 Vp-p, 75 ohms
R
R
AUDIO (phono jacks): 500
mVrms (100% modulation)
Impedance: 47 kilohms
S VIDEO (4-pin mini-DIN):
Y: 1 Vp-p, 75 ohms
unbalanced, sync negative
C: 0.286 Vp-p (NTSC burst
signal), 75 ohms
0.3 Vp-p (PAL burst signal), 75
ohms
VIDEO (phono jack):
1 Vp-p, 75 ohms unbalanced,
sync negative
AUDIO (phono jacks):
2 channels, 500 mVrms
Impedance: less than 1 kohms
RGB 1, 2 IN
RGB OUT
Speaker output
Power requirement
Power consumption
Dimensions
Mass
Supplied accessories
Optional accessories
Design and specifications are subject to change without
notice.
– 2 –
D-sub 15-pin, female
VIDEO: R, G, B: 0.7 Vp-p,
positive, 75 ohms
SYNC: Sync on Green: 0.3 Vp-p
HD: Composite sync:
TTL, high impedance,
sync positive/negative
Horizontal sync: TTL, high
impedance, sync positive/
negative
VD: Vertical sync: TTL, high
impedance, sync positive/
negative
AUDIO (phono jacks)
2 channels, 500 mVrms
Impedance: more than 47 kohms
D-sub 15-pin, female
VIDEO:
R, G, B: 0.7 Vp-p,
positive, 75 ohms
SYNC: Sync on Green: 0.3 Vp-p
HD: Composite sync:
TTL, high impedance,
sync positive/negative
Horizontal sync: TTL, high
impedance, sync positive/
negative
VD: Vertical sync: TTL, high
impedance, sync positive/
negative
AUDIO (phono jacks)
2 channels, 500 mVrms
Impedance: less than 1 kohm
Front: 5 W × 2 (L/R)
Woofer: 15 W
100 to 240 V AC, 50/60 Hz
220 W (MAX)
Standby mode: 4 W
1,125 × 1,087 × 610 mm (44
3
× 24
7
/
1
/
inches) (w/h/d)
8
8
Approx. 43 kg (106 lbs 8 oz)
Remote control RM-902 (1)
Size AA (R6) batteries (2)
AC power cord (1)
RGB signal cable (D-sub 15-pin
˜ D-sub 15-pin) (1)
HD15-HD15 (male, without the
No. 9 pin) adaptor (1)
Macintosh adaptor (1)
Windows Monitor Information
Disk/Utility Disk (1)
Macintosh Utility Disk (1)
Brackets (2)
Screws for brackets (2)
Hexagon head wrench (1)
Lamp unit: XL-100 (for Japan),
XL-100U (only for the U.S.),
XL-100M (for countries other
than Japan or the U.S.)
Monitor stand: SU-90T (only for
Japan), SU-90U (only for the
U.S.)
× 42
/
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kl-x9200u

Table of Contents