Sony KL-X9200M Service Manual page 13

Step 3: Setting up
the r emote
control
Inserting batteries
Insert two AA (R6) size batteries (supplied) by
matching the + and – on the battery to the diagram
inside the battery compartment.
Notes
• If the remote control does not operate properly, the batteries
may be worn out. When replacing batteries, replace both of
them with new ones.
• Do not mix old batteries with new ones or mix different types
of batteries together.
• If the electrolyte inside the battery should leak, wipe the
contaminated area of the battery compartment with a cloth and
replace the old batteries with new ones. To prevent the
electrolyte from leaking, remove the batteries when you don't
plan to use the remote control for a long period of time.
• Do not handle the remote control roughly. Do not drop it, step
on it, or let it get wet.
• Do not place the remote control in direct sunlight, near a
heater, or where the humidity is high.
14
-GB Getting Started
Changing the menu
language
MENU ENTER
If you prefer Spanish, French, German, Italian or
Japanese to English, you can change the menu language.
1
Press MENU.
MENU
2
Press v or V to select " (OPTION)," and
press ENTER.
O P T I O N
AUTO SHUT OFF: OFF
LANGUAGE: ENGLISH
ENTER COLOR SYSTEM: AUTO
EXIT
3
Press v or V to select LANGUAGE, and press
ENTER.
O P T I O N
AUTO SHUT OFF: OFF
LANGUAGE: ENGLISH
COLOR SYS ESPAÑOL
ENTER
FRANÇAIS
DEUTSCH
ITALIANO
EX I T
4
Press v or V to select your favorite language,
ENGLISH, FRANÇAIS (French), DEUTSCH
(German), ESPAÑOL (Spanish), ITALIANO
(Italian) or (Japanese), and press
ENTER.
ENTER
5
Press MENU to return to the original screen.
Notes
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the monitor.
• You cannot use the AUTO SHUT OFF function for the input
from VIDEO 1/2/3 IN and COMPONENT IN. (See page 24.)
• To get back to the previous menu, select with v or V and press
ENTER.
Operations
Projecting the
picture
RGB
COMPONENT
VIDEO
LAMP STANDBY RGB COMPONENT VIDEO –VOLUME+
u (power) switch
MUTING
DISPLAY
VIDEO COMPONENT RGB
MENU ENTER
1
If the STANDBY indicator on the front of
the monitor is lit in orange, press 1/u
(power) on the remote control to turn on
the power.
LAMP STANDBY
Press the u (power) switch on the monitor if the
STANDBY indicator is not lit.
The green u (power) indicator flashes, then lights
up.
2
Turn on the power of the connected
equipment.
3
Press RGB, VIDEO or COMPONENT on the
remote control or the monitor to select the
input you want to watch.
The selected input indication is displayed on the
screen.
To watch a computer picture input from the
RGB 1/2 IN connector
Each time you press RGB, the display changes as
follows:
RGB 1 ˜ RGB 2
Remote control Monitor
RGB
RGB
or
To watch a video picture input from the
VIDEO 1/2/3 IN jacks
Each time your press VIDEO, the display changes
as follows:
VIDEO 1 n VIDEO 2 n VIDEO 3
Remote control Monitor
VIDEO
VIDEO
or
To watch a picture of a DVD player input
from the COMPONENT IN jacks
Press COMPONENT.
Remote control Monitor
COMPONENT COMPONENT
or
The input signal indication will automatically
disappear.
4
Press VOL +/– (VOLUME +/–) to adjust the
volume.
Remote control Monitor
VOL
–VOLUME+
or
(continued)
15 -GB
Operations
GB